1-1/2 Inch 18 Gauge Cap Stapler | Metabo HPT N3808AP
Model# N3808AP
- FASTENERS: 7/16-in crown 18 gauge staples of 7/8-in, 1-1/4-in, and 1-1/2in lengths
- APPLICATIONS: Ideal cap stapler for roofing felt, foam insulation, and house wrap
- LIGHTWEIGHT: Only 4.8 lbs with an ergonomic design enables long periods of continuous use
- FASTENERS: 7/16-in crown 18 gauge staples of 7/8-in, 1-1/4-in, and 1-1/2in lengths
- APPLICATIONS: Ideal cap stapler for roofing felt, foam insulation, and house wrap
- LIGHTWEIGHT: Only 4.8 lbs with an ergonomic design enables long periods of continuous use
Features
FASTENERS
Accepts 7/16-in crown 18 gauge staples of 7/8-in, 1-1/4-in, and 1-1/2in lengths
CAPACITY
Basket holds 200 caps and the magazine holds 200 staples
DEPTH ADJUSTMENT
Tool-less depth of drive adjustment for optimal fastener depth to accommodate a variety of applications
LIGHTWEIGHT
Only 4.8 lbs with an ergonomic design enables long periods of continuous use
The 1-1/2 Inch 18 Gauge Cap Stapler (N3808AP) brings power, precision, and convenience to the home-wrap and roof-felt industry. With a weight of only 4.8 lbs, and accepting 200 staples and caps in the magazines, this tool provides maximum jobsite efficiency. It drives 18-Gauge 7/16" crown staples through 1" diameter caps to provide maximum hold and support.
Exceptional balance, tool-less depth of drive and 360° adjustable exhaust make this cap stapler ideal for housewrap, insulation, tar paper, synthetic roofing underlayment and other similar applications. The Cap Stapler comes standard with a sequential trigger installed on the tool and an optional contact (bump) trigger in the box.
Features of the Cap Stapler
- FASTENERS: 7/16-in crown 18 gauge staples of 7/8-in, 1-1/4-in, and 1-1/2in lengths
- APPLICATIONS: Ideal cap stapler for roofing felt, foam insulation, and house wrap
- LIGHTWEIGHT: Only 4.8 lbs with an ergonomic design enables long periods of continuous use
- CAPACITY: Basket holds 200 caps and magazine holds 200 staples
- PERFORMANCE: Provide superior hold and shear values than common 3/8 In. systems
- TRIGGER: Two triggers, red for sequential firing and black for bump firing
- DEPTH ADJUSTMENT: Tool-less depth of drive adjustment for optimal fastener depth to accommodate a variety of applications
- AIR DEFLECTOR: 360 degree adjustable air deflector directs the air exhaust in any direction
- MAGAZINE: Translucent side-load cap magazine to easily identify remaining cap quantity
- RECOMMENDED: Use Metabo HPT Staples for best results
- TOOL CARD: Download the N3808AP Tool Card
Staples & Plastic Caps
Available Staples:
- 7/8" x 7/16" x 18GA 2M (31102S)
- 1-1/4" x 7/16" x 18GA 2M (31105S)
- 1-1/2" x 7/16" x 18GA 2M (31107S)
Included with the Cap Stapler:
- Safety Glasses (875769)
- Contact (Bump Trigger)
Specifications
| Staple Length | 7/8" - 1-1/2" |
| Staple Capacity | 200 |
| Cap Diameter | 1" |
| Cap Capacity | 200 |
| Fastener Cap Type | Plastic |
| Depth Adjustment | Tool-less |
| Adjustable Exhaust | Yes |
| Actual Weight | 4.8 lbs |
| Tool Length | 14-1/8" |
| Tool Height | 8-7/8" |
| Operating Pressure | 70-120 psi |
| Warranty | 5-Year |
Includes
- Safety Glasses (875769)
- Contact (Bump Trigger)